Modifying/Setting the master Code
step
Operation
1
In disarm status, depress[*][5][#] to entry into function status
2
Input 4 digit master code then depress [#] to confirm, such as [1][2][3][4][#]
3
Input new 4 digit code then depress [#] to confirm, such as [5][6][7][8][#]
4
If successful, the keypad will emit a confirming tone “Beep
：”
. The selected User
Code is now in effect.
5
Exit by depress [*][*]
6
If operate incorrectly, depress [*] to back to the step 2
Modifying/Setting User’s Codes
Step
Operation
1
In disarm status, depress [*][5] to entry into function status
2
Entry Master Code: such as [5][6][7][8]
3
Modify/set user 1 code, depress [1] or
Modify/set user 2 code, depress [2] or
…
The other user codes can be modify/set in the same way.
4
Entry the new user code:
For example, [3][3][5][5]
5
If successful, the keypad will emit a confirming tone “Beep
：”
.
Deleting User’s Codes
At times, it may be desirable to completely delete a user code. Note that it is impossible to delete
the master code (although it can be changed).
Step
Operation
1
In disarm status, depress [*][5] to entry into user function status
2
Entry the master code: [5 ][ 6][7 ][8 ]
3
To delete the user code 1, depress
[1]
To delete the user code 2, depress
[2]
To delete the user code 3, depress
[3]
…
The other user s can be deleted in the same way.
4
Entry the
[#] to
delete this User Code
5
If successful, the keypad will emit a short confirming beep.
RP248CN User’s and Installer’s Manual
Page 13
