12
SYGMA
Move through the hours using
or
and change each hour’s
programming using the
button every time you wish to change the
setting.
If you do not wish to change the programming of a particular hour,
continue to the next hour you wish to change. Once all of the hours
are programmed, or left blank without programming, press the
button to exit or leave the unit for 30 seconds without pressing
anything.
3. MOUNTING INSTRUCTIONS
Inside the box you will find a mounting kit.
1. Choose the right part of the wall.
2. Place the mounting stencil on the wall, marking the places for
the holes.
3. Remove the stencil and make the holes in the wall.
4. Insert the rawl plugs in the holes made.
5. Screw the plastic fastener to the wall with the 5,5 x 50 mm screw.
6. Screw the two brackets for supporting the heated towel rail and
the plastic fastener to the horizontal tube of the heated towel rail
like in Figure 1 with the 8 x 26 mm screw.
7. Insert what you have assembled in Section 6 into the plastic piece
and fix well with the 5 x 12 mm stud bolt.
8. Place the cover on the piece supporting the heated towel rail.
Содержание SYGMA STN030SEB2
Страница 4: ...4 SYGMA TFT DISPLAY CONTROL PANEL 1 DESCRIPTION OF THE SYGMA TOWEL RAIL 1 1 Front panel parts ...
Страница 22: ......
Страница 23: ...23 DIGITAL ELECTRIC TOWEL RAIL SYGMA ...