14
SYGMA
This appliance is designed to be permanently installed connected to
fixed facilities. The heated towel rail power supply circuit must have
an all-pole circuit breaker switch with a separation of at least 3 mm
between the contacts.
The appliance must be installed, if possible, away from any source
of draughts (windows, doors) or any other thing which may affect its
functioning. In this way, the temperature will not be affected. Place
any object which might prevent the air flow (furniture, armchairs) 50
cm away from the front of the appliance. The electric towel rail must
never be installed immediately below a power point.
The lower part of the control panel must be placed at least 15 cm
from the floor.
For any appliance, if the power cable is damaged, it must be replaced
by a specific cable. The replacement of the cable must be done by the
maker, its after-sales service or qualified personnel. The technical
specifications of your appliance appear on the technical data label.
OK
IMPORTANT
• This device must never be installed with its control panel at the top.
• This device must not be installed horizontally.
• During installation, use wedges so that the control panel will not be
in contact with the floor.
Содержание SYGMA STN030SEB2
Страница 4: ...4 SYGMA TFT DISPLAY CONTROL PANEL 1 DESCRIPTION OF THE SYGMA TOWEL RAIL 1 1 Front panel parts ...
Страница 22: ......
Страница 23: ...23 DIGITAL ELECTRIC TOWEL RAIL SYGMA ...