Virtual Cash Controller product guide – page 4
VCC product options
There are several product options available for the VCC
terminal; these are governed by the choice of user ID
media for the system users.
ABA magnetic card reader
(track 2)
This will read any ISO7810 track 2, magnetic card and
pass the information to the server software for
authentication. All credit cards, ATM cards, most student
ID cards, drivers licenses (US) use this format. Boscop can
supply track 1 or track 3 by special order.
Barcode swipe reader
Ideally suited to printed barcodes where the barcode is
printed in the same position as a track 2 magnetic stripe.
Track 1 and track 3 positions may be catered for by
special order.
Codes read include
UPC/EAN/JAN & ADDON/25, CODE
39, CODE 39 FULL ASCII, CODE 32, INTERLEAVE 25,
INDUSTRIAL 25, MATRIX 25, CHINA POSTAGE, CODE 128,
CODE 93, CODE 11, CODABAR/NW7, MSI/PLESSEY,
TELEPEN
Mifare, iClass RFID card reader
Our 13.56MHz proximity reader version can read either
iCLASS credentials (transmitting Wiegand formatted data
as encoded), Mifare
®
Standard, Ultralight, or DESFire
®
credentials (transmitting Wiegand data based on the card
serial number in various formats).
Note
– to read proprietary iClass formats we will need the
consent of the format owner.
HID Proximity card reader
Our HID 125kHz reader can read 26 and 34 bit HID
Proximity cards, as well as any iClass cards using 125kHz.
Note
– to read proprietary HID formats we will need the
consent of the format owner.
EM4102 proximity card reader
Mostly used in Europe, we have fully integrated the
125kHz EM4102 and can supply readers to special order.
Impro 125kHz proximity card reader
We have integrated the Impro Omni-Scan reader module;
this read only device has a scan range of up to 6”. It reads
Impro Standard, Impro Slim and Impro Pico credentials.
Barcode scanner option
The VCC terminal can be supplied with an externally
mounted barcode scanner fixed underneath the terminal
for use when the barcode is either printed out of position
for use with a swipe reader or for use when libraries place
an adhesive backed barcode onto a card, causing the
barcode to be out of position or crooked.
Codes read include
UPC/EAN/JAN & ADDON/25, CODE
39, CODE 39 FULL ASCII, CODE 32, INTERLEAVE 25,
INDUSTRIAL 25, MATRIX 25, CHINA POSTAGE, CODE 128,
CODE 93, CODE 11, CODABAR/NW7, MSI/PLESSEY,
TELEPEN
Floor stand FS-1
The optional stand is ergo-
nomically designed to
promote greatest ease of use
of the terminal. Sloping the
keypad and display towards
the user, it is accessible by
both pedestrian and
wheelchair patrons and de-
signed for placement either at
the front or rear on either
side of the copier. All cables
are securely routed inside the
stand for maximum security.
Picture shows cabling routed
inside the stand upright.
Wall Mount WM-1
If space is at a premium and the equipment has to be set
up against a wall or by a pillar then the optional wall
mount will help.
Track 2 stripe requirements are .25” wide and
positioned between .218” and .468” from the
card edge
