5
User can adjust the time as their need, but if not adjust, Turn on the system
default 8 hours.
The temperature can be adjusted in 5 levels,5/4/3/2/1/5 button circulation
Setting 5, setting 4, setting 3 for pre-heat fast for 15 minutes, if don’t need fast
heat any more, button “Cancel”, then button “Temperature” to
Constant
temperature state. If you turn on the controller and set no specific setting, it defaults to
setting 5 and after 3 hours of operation, it will change to setting 3.
●
Humanized design:
To avoid too hot ,after working on “setting 5” or
“setting 4”
3
hours, system can change from setting 5 or setting 4
to “setting 3” to keep warm.
●
Set the temperature by pressing "temp" (red light will glow)
⚫
Set the time by pressing "time" (green light will glow)
⚫
When the time is up, the controller will turn off automatically
Dual control: Equivalent to two single beds combined. Two people can adjust
according to their own needs without interfering with each other.
When the electric blanket runs, the control must be uncovered in a position that is easy to
access. Ensure not to put the control under the quilt, pillow, or covered by other
things. Do not leave the control close to any other heat source in case the control is
overheated and damaged.
IV Daily checks and safeguards
To guarantee the electric blanket is used safely. Please pay attention to the following
items:
1. Pay attention and observe the power cords, plug, soft cords that are used to connect
the appliance and control. Check whether there are any unusual situations before
using. If uncertain about the condition and whether it is safe or not, don't continue to
use, please send it to the technological service departments of our factory or service
center to maintain or check.
2. During use, checks should be regularly carried out to ensure the electric blanket is
leveled, fitted firmly and not folded or rolled.
3. Examine the appliance frequently for signs of wear or damage. If there are such
signs or if the appliance has been misused, return it to the manufacturer or his agent
prior to
any further use.
4. The heating wire in the electric blanket should be spaced evenly and smoothly with
no crossing, and no folds between wires. Do not use when any of these situations
occur. It must be sent to the technological service departments of our factory or
service center to deal with. Testing method: lay the electric blanket flat on the bed;
touch the heating wires with hand.
5. When the electric blankets is on the bed, forbid children from jumping on the bed. If
this has already taken place pay special attention to check whether every part of the
electric blanket is normal. Use only after confirming it is normal.
6. When any accident or damage takes place (smoking, fire, abnormal sound, abnormal
