Rohloff SPEEDHUB 500/14, Руководство пользователя

Страница: 18 / 27

29
F
G
min. Ø40
Ø40 Ø40 Ø40
Frame types for OEM mounting
Rigid frames with OEM dropouts are specially designed for the mounting of all
OEM versions. The long slot in the left hand dropout holds the support block of the OEM axle plate.
Rohloff Rohloff SPEEDHUB
500/14
Frame types ( ) have unadjustable OEM dropout and are specially designed for rear suspension models. A
chain tensioner must be mounted, because the distance between the chainring and sprocket varies as the rear
suspension is activated. All
OEM versions are suitable for these frame types.
G Rohloff
Rohloff SPEEDHUB 500/14
Frame types ( ) have adjustable OEM dropouts. With these dropouts on a hardtail frame, the need for a chain
tensioner is eliminated because the wheel (once secured into the dropout inserts) can be pulled backwards to tension
the chain. The dropout inserts are available from a variety of manufacturers with or without disc brake mounts and are
all interchangable (supply information is available under www.rohloff.de). All
OEM
versions are suitable for these frame types.
F Rohloff
Rohloff SPEEDHUB 500/14
All versions mounted to frame types must be used in conjunction with a chain tensioner (Art.No. 8250) except
when an eccentric BB is being used. A chain tensioner should be ordered with the initial product as it is not to be found
in the regular OEM package.
G
A T T E N T I O N
Securing to the frame
No matter what shape the left-hand dropout is, a surface of 40mm diameter around the center of the axle must be flat
to allow the axle plate to sit firmly and evenly againt the inner side of the left-hand dropout. This area is shown in the
diagram below.
A T T E N T I O N
Diagram 1: Flat left dropout surface and three different axle plates
30
C C
Ø6.2 mm
Mounting necessities OEM2
For safe OEM2 mounting with the support bolt or the /
1999
MonkeyBone Rohloff SPEEDBONE ,
the following points
must be well noted:
The disc brake mounts must be one piece with the dropout itself, be of international standard (IS ) and have the
following minimum dimension requirements:
When permission has not been granted by the frame manufacturer to mount the
or the support bolt through the disc brake mount, then mounting of the OEM2 versions is at your own risk. Rohloff SPEEDBONE /
Further compatability information can be found under:
www.rohloff.de > FAQ > SPEEDHUB > Axleplates and Dropouts
MonkeyBone
Requiremental for the OEM2 mouting of the with a support bolt is the position of the
disc brake mounts. When the mount hole nearest the axle is behind a vertical line up from the axle center (d
1), then the support bolt can be used. When the hole is in front of the vertical line (d 2), then the use of the
support bolt is not permitted.
Rohloff SPEEDHUB 500/14
C
C
iagram
iagram
A T T E N T I O N
A T T E N T I O N
Securing to the frame
Fig. 1
Fig. 2
Dropout with
disc brake mounts
Position on
the correct
side
Position on
the incorrect
side
Securing holes for the brake caliper
Dropout with
disc brake mounts
R > 6 mm