R&S
TSMX-PPS2
Getting Started
Getting Started 1515.7236.02 - 02
22
4.6 Powering On / Loading USB Driver
The R&S TSMX-PPS2 has no dedicated On/Off Switch and automatically changes into
“Power On” state when connected to the USB port. The green “STATE” LED is on
when powered (see section
).
Windows will identify the R&S TSMX-PPS2 as a new device and load the pre-installed
device driver. Please refer to section
"Installing Software / Device Drive"
how to install
the USB driver.
After enumeration “u-blox 6 GPS Receiver” device is listed in the Windows device
manager (see
). Please notice the assigned COM port number. This
information will be needed in the next step when connecting software to the
R&S TSMX-PPS2 (see section
on page 23).
Figure 4-5: Device Entry in the Windows Device Manager
