R&S
TSMX-PPS2
Device Tour
Getting Started 1515.7236.02 - 02
7
2.2 Connectors - 1
Figure 2-2: Front panel view
1
SENSOR IN
ODU MINI-SNAP connector, 6 pins
Sensor interface for vehicle speed and direction
signal (odometer). The supplied accessory sensor
cable is used to bring these signals into the
device. Sensor signals are only necessary if ADR
should be supported.
2
USB
USB connector Type B
The USB port serves as power supply and as bi-
directional data interface. Position data and
device control data will be transferred via this
interface.
3
PPS OUT
SMA connector (female)
Output port for the precision time pulse signal.
Source Impedance: 100 R
Level: TTL / 3,3 V
