Rohde & Schwarz TS7124AS, Инструкция по эксплуатации, Страница: 62 / 69

Disabling and Scrapping
R&S
®
TS7124AS
62 Instructions Handbook 1179.2948.02 ─ 01
11 Disabling and Scrapping
Every user except the operator is allowed to perform the activities described in this
chapter.
Familiarize yourself with residual risks and potentially dangerous situations.
See Chapter 2.2, "Residual Risks" , on page 10 and Chapter 2.3, "Potentially Danger-
ous Situations" , on page 11.
● Taking Out of Commission ...................................................................................... 62
● Dismounting ............................................................................................................ 64
● Disposal .................................................................................................................. 65
11.1 Taking Out of Commission
To secure the door
1. If a DUT or other equipment of yours is still in the chamber, take it out.
2. Close the door of your chamber.
3. Secure the door against unintentional opening.
If available, use the metal safety latch next to the top left corner of the front door to
secure it:
Figure 11-1: Metal safety latch
To label the chamber as out of commission
► If you take a malfunctioning chamber out of commission, make sure that nobody
uses the chamber. Take the steps that are stipulated in your company for malfunc-
tioning equipment.
To disconnect from power and control
1. Disconnect the DC (low voltage) plug of the power supply unit from the chamber.
The chamber is deactivated.
2. Disconnect the power supply unit from mains grid power.
Taking Out of Commission