Rohde & Schwarz TS7124AS, Инструкция по эксплуатации, Страница: 64 / 69

Disabling and Scrapping
R&S
®
TS7124AS
64 Instructions Handbook 1179.2948.02 ─ 01
3. While keeping the blue ring pushed in, gently pull the tube out of the adapter in the
opposite direction, as indicated by the black arrow.
4. If you wish to keep the push-pull adapter with the chamber, place it back on the
quick-coupling plug:
a) Hold the adapter at its rear part.
b) Push the adapter onto the plug as shown in
Figure 6-8 .
11.2 Dismounting
1.
WARNING! Risk of tilting. See "Chamber is heavy" on page 10.
If the chamber is mounted on a table or similar support, remove the four mounting
brackets that fix the chamber in place at its corners.
2. If the chamber is mounted in a rack, detach the chamber as follows:
a) On the rear side of the rack, detach the chamber from the rails that carry it.
b) On the front side of the rack, detach the metal rack-cover sheet from the cham-
ber and from the rack.
c) Remove the metal sheet.
3.
WARNING! Chamber is heavy. See Chapter 5.1, "Lifting and Carrying" ,
on page 21.
Lift the chamber at its handles with at least 2 people and place it on the floor or on
a transporting equipment.
Dismounting