manualshive.com logo in svg

Rohde & Schwarz TS7124AS, Инструкция по эксплуатации, Страница: 67 / 69

Поделиться
Скачать
Rohde & Schwarz TS7124AS Скачать руководство пользователя страница 67

Glossary: List of Frequently Used Terms and Abbreviations

R&S

®

TS7124AS

67

Instructions Handbook 1179.2948.02 ─ 01

roles: 

The handbook defines the following roles for performing various tasks with the

chamber:

user
operator
expert user
supervisor
trainer
transportation appointee
maintenance personnel
service personnel
calibration appointee

S

service personnel: 

Service personnel appointed or employed by Rohde

 

&

 

Schwarz.

See also 

roles

.

SMA / SMP connector: 

SubMiniature coaxial RF connector, version A (standard) /

version P (precision, pluggable)

supervisor: 

Expert user who instructs and supervises other users. Has leadership

experience and production control expertise. See also 

roles

.

T

trainer: 

Expert user who trains other users. Has experience in training and instruction.

See also 

roles

.

transportation appointee: 

Carrier with experience in using transporting equipment.

Trained to handle heavy, sensitive equipment with care and without disregard for safety
and health. See also 

roles

.

U

USB: 

Universal serial bus, industrial connector standard

user: 

Anyone who uses or handles the chamber during its lifecycle. Includes the oper-

ating company and its personnel, for example maintenance personnel, trainers and
operators. See also 

roles

.

Содержание TS7124AS






































































Отзывы:

Нет отзывов