Rohde & Schwarz SGU100A Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 236

Rohde & Schwarz SGU100A Скачать руководство пользователя страница 31

Instrument Tour

R&S

®

SGU100A

29

User Manual 1176.7726.02 ─ 09

The [RF ON] key switches the RF signal on or off. If activated, the button is green.

[LO IN]

The [LO IN] LED indicates the compatibility of the level of the LO input signal with the
correct operation of the R&S

SGU.

●

Green indicates that the level of the LO input signal is in the range of correct oper-
ation.

●

Red indicates that the level of the LO input signal is too high or too low.

●

No light indicates that the instrument is in a bypass mode.

[ERROR / WARNING]

The [ERROR / WARNING] LED indicates the status of the R&S

SGU.

●

Red indicates that an error has occurred, e.g. temperature exceeded or power fail-
ure.

●

Blinking orange indicates a running process (e.g calibration, self test).

●

No light indicates that no errors or warnings have occurred.

For details on errors or warnings, refer to the graphical user interface on a remote PC
("SGMA-GUI > Info").

For more information, refer to the "Error Messages" section in the user manual.

[LAN]

The [LAN] key indicates if a LAN connection is established.

Green LED indicates that a network cable is connected to the instrument and no error
in the DHCP connection is detected. But it does not indicate that the remote control
connection is established for all cases. For example, if the instrument is set to use a
"Static" IP address the instrument may still not be visible in the network.

Pressing the key resets the LAN interface settings, i.e the "IP Adress Mode" is reset to
DHCP.

[ID]

Front Panel Tour

«
...
29
30
31
32
33
...
»

Содержание SGU100A













































































































































































































































Отзывы:

Нет отзывов