Rohde & Schwarz AMU-K48, Руководство по эксплуатации

Страница: 56 / 88

Remote-Control Commands IEEE 802.11 (a/b/g)
56 Operating Manual 1171.5283.12 ─ 18
Setting parameters:
<Filename> string
Example: BB:WLAN:SETT:LOAD 'wlana'
loads file
wlana
.
Usage: Setting only
Manual operation: See " Save/Recall " on page 23
[:SOURce<hw>]:BB:WLAN:SETTing:STORe <Filename>
This command stores the current IEE 802.11a-g WLAN settings into the selected file.
The directory is set using command
MMEM:CDIRectory
. A path can also be specified,
in which case the files in the specified directory are read. Only the file name has to be
entered. IEE 802.11a-g WLAN settings are stored as files with the specific file exten-
sions
*.wlan
.
Setting parameters:
<Filename> string
Example: BB:WLAN:SETT:STOR 'wlan_g'
stores the current settings into file
wlan_g
.
Usage: Setting only
Manual operation: See " Save/Recall " on page 23
[:SOURce<hw>]:BB:WLAN:SETTing:STORe:FAST <Fast>
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
<Fast> 0 | 1 | OFF | ON
*RST:
1
[:SOURce<hw>]:BB:WLAN:SLENgth <Slength>
The command selects the number of frames. The command is only valid in framed
mode (
SOURce:BB:WLAN:SMODe FRAMed
).
Parameters:
<Slength> float
Range:
1 to depends on other settings
*RST: 1
Example: BB:WLAN:SLEN 4
selects the generation of 4 frames.
General Commands