Rohde & Schwarz AMU-K48, Руководство по эксплуатации

Страница: 55 / 88

Remote-Control Commands IEEE 802.11 (a/b/g)
55 Operating Manual 1171.5283.12 ─ 18
<BitCount> integer
Range:
1 to 16
*RST: 1
Example: BB:WLAN:SERV:PATT #H3F,8
the value for the service field is set.
Manual operation: See " Service field (hex) " on page 33
[:SOURce<hw>]:BB:WLAN:SETTing:CATalog?
Reads out the files with IEEE 802.11a-g settings in the default directory. The default
directory is set using command
MMEM:CDIRectory
. Only files with the file extension
*.wlan
will be listed.
Return values:
<Catalog> string
Example: MMEM:CDIR "<root>wlan"
sets the default directory
BB:WLAN:SETT:CAT?
reads out all the files with IEEE 802.11a-g settings in the default
directory.
Response: 'wlana','wlang'
the files
wlana
and
wlang
are available.
Usage: Query only
Manual operation: See " Save/Recall " on page 23
[:SOURce<hw>]:BB:WLAN:SETTing:DELete <Filename>
This command deletes the selected file with IEEE 802.11a-g WLAN settings.. The
directory is set using command
MMEM:CDIRectory
. A path can also be specified, in
which case the files in the specified directory are read. The file extension may be omit-
ted. Only files with the file extension
*.wlan
will be deleted.
Parameters:
<Filename> string
Example: BB:WLAN:SETT:DEL 'wlana'
deletes file
wlana
.
Manual operation: See " Save/Recall " on page 23
[:SOURce<hw>]:BB:WLAN:SETTing:LOAD <Filename>
This command loads the selected file with IEEE 802.11a-g WLAN settings.. The direc-
tory is set using command
MMEM:CDIRectory
. A path can also be specified, in which
case the files in the specified directory are read. The file extension may be omitted.
Only files with the file extension
*.wlan
will be loaded.
General Commands