Remote-Control Commands
IEEE 802.11 (a/b/g)
49
Operating Manual 1171.5283.12 ─ 18
4
Remote-Control Commands
The following commands are required to perform signal generation with the IEEE
802.11a-g WLAN option in a remote environment. We assume that the R&S
Signal
Generator has already been set up for remote operation in a network as described in
the R&S
Signal Generator documentation. A knowledge about the remote control oper-
ation and the SCPI command syntax are assumed.
Conventions used in SCPI command descriptions
For a description of the conventions used in the remote command descriptions, see
section "Remote Control Commands" in the R&S
Signal Generator operating manual.
Common Suffixes
The following common suffixes are used in remote commands:
Suffix
Value range
Description
SOURce<hw>
[1]|2
available baseband signals
OUTPut<ch>
1 .. 4
available markers
R&S SMBV supports two markers
EXTernal<ch>
1|2
external trigger connectors
Placeholder <root>
For commands that read out or save files in the default directory, the default directory
is set using command
MMEM:CDIRectory
. The examples in this description use the
place holder
<root>
in the syntax of the command.
●
D:\
- for selecting the internal hard disk of a Windows instrument
●
E:\
- for selecting the memory stick which is inserted at the USB interface of a
Windows instrument
●
/var/user/
- for selecting the internal flash card of a Linux instrument
●
/usb/
- for selecting the memory stick which is inserted at the USB interface of a
Linux instrument.
