WLAN User Interface
IEEE 802.11 (a/b/g)
41
Operating Manual 1171.5283.12 ─ 18
The "Marker Mode" section is where the marker signals at the [MARKER] output con-
nectors are configured.
The "Marker Delay" section is where a marker signal delay can be defined, either with-
out restriction or restricted to the dynamic section, i.e., the section in which it is possi-
ble to make settings without restarting signal and marker generation.
The "Clock Settings" section is where the clock source is selected and - for an external
source - the clock type.
The buttons in the last section lead to submenu for general trigger, clock and mapping
settings.
3.6.1
Trigger In
The "Trigger In" section is where the trigger for the signal is set. Various parameters
are provided for the settings, depending on which trigger source - internal or external -
is selected. The current status of signal generation ("Running" or "Stopped") is indica-
ted for all trigger modes.
Trigger/Marker/Clock Settings
