MobiLink IP
SMS
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 89 of 188
The message must be sent as
Plain Text
,
not HTML, and will be cut (truncated) at 160
characters.
Also, you should use either ASCII or
Unicode (UTF-8) encoding.
In the “Subject” field, enter the phone
numbers(s) as destination for the SMS.
You may type a single mobile number, or
several phone numbers,
using blank space
as a delimiter,
as you can see in this
example.
The respective e-mail message will be sent out as a SMS to all the mobile phone numbers you have
entered in “Subject”.
SMS to E-mail
Settings for the reciprocal feature, which converts received SMS into e-mail messages
Status
: you must Enable this feature, in order to use it.
By default it is also disabled.
When you
Enable
SMS-to-Email, the received messages will no
longer be seen in Inbox, because they are deleted as soon as they
are sent out as E-mail messages.
From/To
mail settings.
In the FROM field you can enter any address, it is not a “real” e-
mail sender. However, you should use a meaningful name.
In the above example, the secretaries at “office” will know that the e-mails coming from the sender
“SMS Inbox” are in fact converted SMS messages, and may set up their mail client to process these
messages accordingly.
