MobiLink IP
CALL CONTROL
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 122 of 188
The field Ignore and respectively Limit have exactly the same significance as for the incoming calls
You can set the device to ignore the first 00 … 15 digits out of the phone
number.
This is to be used together with special rules for routing of the outgoing calls –
for instance, the local subscribers must dial a ‘6’ to get access to the public
telephony networks, and the pbx application must be told to ignore the first digit
of the telephone number.
You can establish a time limit (in seconds) for the duration of outgoing calls,
such as 3200 seconds in this example.
Such limitation is especially useful when, following a phone conversation, the
local subscriber does not hung up, and the call could remain connected,
unnecessary generating a very high phone bill for the respective SIM.
Use
Save
and then
Commit
to make your changes persistent!
6.7.6 PBX Query
Allows the sending of text commands to the phone exchange application which runs on the MobiLink
IP equipment.
When you press the button Execute, the PBX application executes the command and displays the
answer below, as shown in the above example.
