MobiLink IP
SOFTWARE INFORMATION
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 15 of 188
The permanent identification info shown refers to the following elements:
-
Serial Number: each MobiLinkIP device from Rohde & Schwarz Topex S.A. has a unique
identification number, such as 2709061 in the above examples, etc. This is the serial
number of the main board of the Rohde & Schwarz Topex S.A. gateway. According to the
requirements of the users, a certain MobiLinkIP motherboard may be factory-fitted with
one or two modems of different types, or other hardware features, but the serial numbers
remain the same;
-
Firmware version: version of the application firmware running on MobiLinkIP: you may see
“
Mobililik-ip-1.2.18-M2J-SAX”
or “
Mobililik-ip-1.2.21-M2J-SCX”
. The firmware can be
easily updated (a new version), upgraded (new software features added) or switched to
another variant;
-
Kernel version (Operating system version), such as “system-1.0.8-MXX-SZW‘ or “system-
1.0.13.-MXX-SAX” in the examples above. The application firmware and the operating
system (root or kernel) may be updated separately, according to the requirements of the
users. The operating system memory is write-protected, thus in case of problems,
accidental erasing or power failure during updating, there is still a functional “system”
allowing loading of a new software image;
To be able to see this Status page, one must be logged-on to the MobiLinkIP device.
