6
Assembly Instructions
Connect the Handlebar (1) to
the Main frame (19) using
2 x M8 x 35mm Allen Bolt (11),
2 x M8 Spring Washer (15) and
2 x M8 Curved Washer (12).
Attatch the Holder of monitor (9)
on the Handlebar (1).
Tighten the opening of the
Holder (9) with one Screw (10).
Slide the Exercise Monitor (4)
onto the Holder (9).
Connect the Sensor Wire
(20) together and fit the Hand
Pulse Wire (18) into the rear of
the Exercise Monitor (4).
WARNING! Heart rate
monitoring systems may be
inaccurate.
Over exercise may result in
serious injury or death.
If you feel faint stop exercising
immediately.
Step 3
Remove the 3 x M8 Saddle
Washer (16) and 3 x M8
Saddle Nut (17) from the
Saddle (5).
Fix the Saddle (5) to the Saddle
Stem Insert (2) by refitting the
M8 Saddle Washers (16) and
M8 Saddle Nuts (17) previously
removed. Attach the Adjuster
Knob (8) into the saddle support
before you slide the Saddle
Stem Insert (2) into the Main
Frame (19).
Set the Saddle to the desired
height, allowing for a slight
bend in the knee at the bottom
of the pedal rotation.
Re-tighten the Adjuster Knob
(8) .
Step 2
