RWL-1-SL Operating Manual.doc
2021-12-20
4/13
Fig. 4. Electronic module inside external escutcheon
Internal part of RWL-1-SL
The internal part of RWL-1-SL consists of escutcheon with handle and it is dedicated to installation at
the exit from controlled room. The escutcheon is equipped with knob switch (H) and detector to
monitor its status using cable with connector (I). The connector can be plugged into socket (K) at the
mortise lock. The door can be locked with the knob switch and then it cannot be opened from the
outside using proximity card. When the handle is twisted then the knob reverts to normal position.
The internal escutcheon includes also battery pack (J). In order to replace batteries unscrew two top
bolts and pull the pack off. Wires with plug (M) are connected to socket (E) at external escutcheon in
order to supply it.
Fig. 5. Internal part of RWL-1-SL
