RWL-1-SL Operating Manual.doc
2021-12-20
2/13
D
ESIGN AND APPLICATION
RWL-1-SL lock enables read-in access control based on MIFARE proximity cards - based on the card
numbers stored in its memory, the lock decides autonomously if the access can be granted.
The RWL-1-SL lock consists of two escutcheons with handles and mortise lock. Card reader is installed
in the external escutcheon while the battery pack is installed in the internal escutcheon. The internal
handle is permanently coupled with deadbolt thus the door can be always opened from the inside
regardless of proximity card and batteries charge level. The external handle is separated from the
deadbolt and moves freely. When the access is granted the electronic module couples the external
handle with deadbolt and latch to enable door opening. When the door is closed then the deadbolt is
relocked automatically in order to protect door against unauthorized opening. The RWL-1-SL lock can
be optionally equipped with door cylinder and then be opened from the outside with traditional metal
key. The RWL-1-SL is equipped with knob switch position detector. The lock is supplied with 4 pcs of
AA batteries. Low battery level can be signalled locally. The batteries enable two year operation for
average 10 card readings per day.
Depending on door opening direction and handle location on the door leaf the adequate type of RWL-
1-SL lock must be applied.
Version
Description
RWL-1-SL-LI
Left hand door
RWL-1-SL-RI
Right hand door
RWL-1-SL-LO
Left hand reverse door
RWL-1-SL-RO
Right hand reverse door
Fig 1. RWL-1-SL lock in inward opening doors while standing outside
