MCT12E Operating Manual
05.10.2020
5/14
Fig. 3 Tamper loop example
Outputs
Terminals in
–IO version e.g. MCT12E-IO offer 2 transistor open collector type outputs (15V/1A rated) and 1
relay output with NO/NC contacts (30V/1.5A DC/AC rated). Electric parameters such as polarity are
configured within low level configuration (RogerVDM). Function are assigned to outputs within high level
configuration (VISO). Multiple functions with different priorities can be assigned to the same output at the
same time.
Identification
Depending on the version, following user identification methods are offered by terminals:
EM125kHz (UNIQUE) proximity cards
PINs
EM125kHz cards
EM125kHz proximity cards are widely used in office buildings. If it is necessary to ensure higher level of
security then MIFARE card readers e.g. MCT12M are recommended.
The technical characteristics of the device are guaranteed for RFID cards supplied by Roger. Cards from
other sources may be used, but they are not covered by the manufactures warranty. Before deciding to use
specific Roger products with third-party contactless cards, it is recommended to conduct tests that will
confirm satisfactory operation with the specific Roger device and software in which it operates.
PINs
Except for
–BK versions, terminals accept variable length PINs (by default 4-8 digits concluded with [#] key).
2.
I
NSTALLATION
Table 4. Wires
Name
Wire colour (-IO
version)
Wire colour
Description
12V
Red
Red
12VDC power supply
GND
Black
Blue
Ground
IN1
Pink
IN1 input line
