MCT12E Operating Manual
05.10.2020
11/14
Max. length of PIN
Parameter defines the maximal number of digits for PIN entered with
keypad. If the number of entered digits reaches this parameter then
PIN is automatically sent to controller and [#] key pressing is not
necessary. When set to 0 then automatic PIN transmission is disabled.
Range: 0-8. Default value: 8.
[*] key clears PIN buffer
Parameter defines if already entered digits of PIN can be deleted with
[*] key. Range: [0]: No, [1]: Yes. Default value: [1]: Yes.
Time between keys in PIN [s]
Parameter defines max. time between two consecutive key pressings.
Range: 0-64. Default value: 10.
PIN followed by [#] key
Parameter enables use of PINs with variable length. In such scenario
PIN is concluded with [#] key. Range: [0]: No, [1]: Yes. Default value:
[1]: Yes.
Long key press time [s]
Parameter defines long press time for such key types as [*], [#] and
[F1] - [F4]. When set to 0 then long press is disabled. Range: 0-64.
Default value: 2.
Key press options
Parameter defines key press type for [*], [#] and [F1] - [F4] keys.
Range: [1]: Short press only, [2]: Long press only, [3]: Short and long
press. Default value: [1]: Short press only.
Backlight level [%]
Parameter defines backlight level. When set to 0 then backlight is
disabled. Range: 0-100. Default value: 100.
Input types
IN1, IN2, IN3
Parameter defines the type of input line. Range: [1]: NO, [2]: NC.
Default value: [1]: NO.
Input comments
IN1, IN2, IN3
Parameter defines any text or comment which corresponds to the
object. It is later displayed in VISO program.
Output polarity
REL1, IO1, IO2
Parameter defines polarity of output. Normal polarity means that the
output by default is switched off while Reversed polarity means that
the output by default is switched on. Range: [0]: Normal polarity, [1]:
Reversed polarity. Default value: [0]: Normal polarity.
Output comments
REL1, IO1, IO2
Parameter defines any text or comment which corresponds to the
object. It is later displayed in VISO program.
Object comments
DEV
Parameter defines any text or comment which corresponds to the
device. It is later displayed in VISO program.
Internal Terminal ID1
Terminal enabled
Parameter enables to activate/deactivate card reader.
Keypad enabled
Parameter enables to activate/deactivate keypad.
AF type
Parameter defines authentication factor returned by terminal ID1.
AF class
Parameter defines authentication factor class returned by terminal ID1.
KBD, CDI, BUZZER, LED OPEN,
LED STATUS comment
Parameter defines any text or comment which corresponds to the
object. It is later displayed in VISO program.
RACS CLK/DTA Terminal ID0
Settings in this area do not refer to standard MCT12E readers.
