WM-020-369-10-en
BA SPEEDY classic 2 balance
.doc
STARK Spannsysteme GmbH – Roemergrund 14 - 6830 Rankweil - Austria
Tel.:+43 5522 37400-0 - Fax.:+43 5522 37400-700 - e-mail:
-
www.stark-inc.com
4/16
4 Essential safety
instructions
4.1 Proper use
The fast closing clamp is used for
clamping pallets with mounting fixtures for
workpieces.
The workpieces are intended to be
machined, transported and measured.
Proper use also includes:
-
Following
all
instructions
in
these
operating instructions
-
Undertaking
the
inspection
and
maintenance work
-
Using only genuine parts.
4.2 Foreseeable misuse
Use other than that defined in "Proper
use" or use beyond that defined
is considered improper use!
If used improperly, risks may arise. Improper
use includes e.g.:
-
Exceeding the specifications defined for
normal operation
-
Using as lifting gear and for transporting
loads
The operator/owner bears the sole
responsibility for damage due to improper use.
The manufacturer will not accept any liability
whatsoever.
4.3 On the use of rotating machine
tools
When used in a rotating application, only
operate the fast closing clamp if you are
absolutely sure it is safely clamped. It
must be ensured that the permissible forces
acting on the fast closing clamp as per the
specifications are not exceeded.
Specialist help is required to calculate and
design fast closing clamps for rotating use. Stark
offers this service.
4.4 Modifications or changes
Any
unauthorised
modifications
or
changes to the fast closing clamping
device render null and void any liability
or warranty on the part of the
manufacturer!
For this reason do not make any changes or
additions to the fast closing clamp without
consultation with and the written agreement of
the manufacturer.
