Version
2020.4 Operating
Guide
14
Form a Loop With The Chain
INSTALLING THE REAR WHEEL
I) Make a loop of the chain above the upper pulley to receive the
Sprocket Cluster.
2)
Place the wheel axle into the rear facing dropouts until the axle
is all the way in the dropout. Replace the chain on to the smallest
sprocket.
IMPORTANT: The dropout slot must be clean, and the axle must rest firmly
against its bottom on both sides before the quick release is tightened. This
preserves the alignment of the pawl to the cam as well as the alignment of the
wheel to the brakes.
3)
Tighten the quick release appropriately
4)
Reset and test the rear brakes.
