Version
2020.4
Operating
Guide
15
TROUBLESHOOTING
Transmission not shifting at all,
in manual or automatic mode
Verify
Corrective Procedure
Batteries are good.
If there is doubt concerning condition of the batteries,
replace batteries.
Batteries are
making proper
contact and that
polarity is correct.
Remove batteries from battery compartment. Check
for corrosion or non-conducting interference on
battery terminals. Reinstall batteries, making sure
polarity of batteries is correct according to instructions
"Installing Batteries" on page 4.
Selector mechanism
is free of visible
obstructions.
Brush away visible obstructions from Selector. Rinse
with garden hose at very low pressure. Do not poke
anything into the Selector, as it could cause damage.
Selector makes a
"clicking sound"
when button is
pushed (Up or
Down, Manual or
Automatic Mode)
and Cam is in turned
position after
pushing.
If Selector makes "clicking sound" and Cam is in turned
position (either Up or Down is OK) after pushing:
•
Check proper assembly of Hub and Wheel to frame
(page 11).
•
Check that Pawl on the Sprocket Cluster engages
Cam in Selector.
•
If Selector does not make "clicking sound"
•
Check connectors and condition of electric cable
between Selector, Computer, Junction Box and
Shifter.
•
Replace the Selector.
•
Replace the Computer.
•
Replace the Junction Box.
•
Replace the Shifter.
