Version
2020.4 Operating
Guide
16
Selector makes a
"clicking sound" (Up
or Down, Manual or
Automatic Mode)
and Cam is NOT in
turned position
after pushing.
Remove Selector from Chain Stay mount but leave
Connected to Computer. Push button Up or Down and
determine if Cam is being obstructed from turning. If
Cam is unobstructed, replace Selector. Do not open the
Selector, as you will break the moisture seal and void
the warranty.
Transmission not shifting in manual mode but
shifts in automatic mode
Verify
Corrective Procedure
Position of Mode
Switch
Turn Mode Switch to Manual mode for manual
operation.
Selector does NOT
make a "clicking
sound" when button
is pushed (Up or
Down, Manual or
Automatic Mode).
•
Tighten Connector fitting between Junction Box and
Computer.
•
Replace batteries
•
Replace electrical cable between Junction Box and
Computer.
•
Replace Shifter assembly.
Transmission not shifting in automatic mode
but shifts in manual mode
Verify
Corrective Procedure
Position of Mode
Switch
Turn Mode Switch to Automatic mode for automatic
operation.
Spoke magnets (2),
attached to spokes of
rear wheel, are in
proper position.
Attach spoke magnets in correct position as shown in
"Maintenance And a Few Simple Tests", page 7,
Transmission shifting is unreliable and must frequently
be corrected with the buttons
Verify
Corrective Procedure
