S-8600 UHF RFID Reader User Manual
UHF RFID User Manual
9
Click on Get in Firmware Version or in Reader Identifier, the following screen displays:
Now the reader has connected to PC successfully.
2.2 Setting RF Parameter
After successfully connecting reader, we need to set some basic RF parameters: RF Output
Power & RF Spectrum Setup.
Select RF setup, as illustrated below:
2.2.1 Setting RF Output Power
RF Output Power is the strength of RF output signal from antenna port. Unit is dBm.
The range of output power is 0 - 33dBm. When this value setting completes, it will be
saved in the reader automatically, and won’t be lost after cut off the power.