S-8600 UHF RFID Reader User Manual
UHF RFID User Manual
15
Then click on
Inventory
. At the moment, operating time of each round inventory will be
as short as possible. Generally speaking, if only 1 or 2 tags in RF region, it will takes
50ms to finish the inventory before the reader receive new command. The
time-consuming will be longer when the number of tags increasing.
For specific format of command parameter, see the reader's serial interface protocol
version V2.35.
Method 2:
Use
cmd_name_fast_switch_ant_inventory
command (see serial interface protocol
version V2.35).
The difference between method 1 and 2 is: the process of sending switch antenna
command is omitted in method 2, so it is faster and more efficient. It takes 25ms to read
one tag form one antenna. For specific method of this command, see the reader's serial
interface protocol version V2.35.
We can see the effect of
Fast Switch Antenna Mode
in demo.
Select
Fast switch Antenna Mode
, the following screen displays:
2.4 Accessing ISO-18000-6C Tag
Click on
Access Tag
, the following screen displays:
