Rodgers W-5000, Руководство пользователя

Страница: 134 / 165

Chapter 10
134
Sync In
Port: None, 1, 2, Both
This parameter tells the W-5000 which port(s) to monitor to receive MIDI Clock, Start, Continue and Stop
messages. Press [NEXT] to select this function and the [+]/[-] buttons to select the port(s).
Sync Out
Port: None, 1, 2, Both
This parameter tells the W-5000 which port(s) to transmit MIDI Clock, Start, Continue and Stop messages
from. Press [NEXT] to select this function and the [+]/[-] buttons to select the port(s).
Native In
Port: None, 1, 2
This parameter determines which port (if any) the playback sound generation modules are connected to.
Press [NEXT] to select this function and the [+]/[-] buttons to select the port.
Native Out
Port: None, 1, 2
This parameter determines which port (if any) is used to record Native Mode sequences. Press [NEXT] to
select this function and the [+]/[-] buttons to select the port.
MIDI Native Out
Language: NRPN, CC
W5000 specific controls will be sent to the external sequencer as either Non Registered Parameter Numbers
(NRPNs) or Control Changes (CC). NRPN messages may overflow some sequencers, therefore it is best to
use the native CC language to reduce MIDI bandwidth.
MIDI Start
Stat Send: None, PC, CC, Both
This parameter allows you to select which MIDI messages the W-5000 sends to the Master MIDI Output
when a MIDI real-time Song Start or Song Continue message is received at the MIDI Master Input. Use the
[+] and [-] buttons.
MIDI Local Cntl
Upper: On, Off
This parameter allows you to set the local control setting for the Upper manual. Local control is a setting
which determines whether or not an internal sound source is connected to a keyboard. When local control is
OFF, playing the keyboard will not produce any sound, although MIDI data will be transmitted. This keeps
notes from being played twice; once by the internal sound generator and again by the external MIDI device.
Press [NEXT] to select this parameter. Use the [+] and [-] buttons to turn the local control setting on or off.
MIDI Local Cntl
Lower: On, Off
This parameter allows you to set the local control setting for the Lower manual. Press [NEXT] to select this
parameter. Use the [+] and [-] buttons.
MIDI Local Cntl
Pedal: On, Off
This parameter allows you to set the local control setting for the Pedalboard. Press [NEXT] to select this
parameter. Use the [+] and [-] buttons.
MIDI Mst In
Port: 1, 2
This parameter allows you to select the Master MIDI IN port you want to use. Press [NEXT] to select this
parameter. Use the [+] and [-] buttons.