Rodgers W-5000 Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 165

background image

Chapter 10

114

Drawbar (Lower Manual)
2 2/3' Perc: 0-127

This parameter is a software version of the Upper manual's Perc 2 2/3' drawbar (as there is no physical
drawbar here). Use the [+]/[-] buttons to make the setting.

Drawbar
Gain: 0-127

This parameter allows you to set the overall gain (level) of the Drawbar sounds. Set the gain with the [+]/[-]
(or [++]/[--]) buttons. WARNING: It is possible to create 'digital clipping' (a particularily nasty form
distortion) if this parameter is set too high for particular combinations of Drawbar and Percussion Drawbars.

Perc Time: 0-127

This parameter allows you to set the duration of the percussion envelope. Press [NEXT] to select this
parameter. Set the duration with the [+]/[-] (or [++]/[--]) buttons.

Perc Mode: Sngl, Mult, SnglV, MultV

This parameter allows you to select a percussion trigger mode. With the single trigger mode (Sngl), one
percussion envelope is used for all notes played, regardless of when they are triggered in the envelope cycle.
In the multiple trigger mode (Mult), the percussion envelope is unique for each note played and starts when
the note is triggered. SingleV (SnglV) and MultipleV (MultV) are the same as single and multiple modes
except that the envelopes are velocity sensitive. Press [NEXT] to select this parameter. Set the percussion
mode with the [+]/[-] buttons.

PercRecover: 0-127

This parameter allows you to set the time required for the percussion envelope to recover to the full level
after triggering and releasing notes. Press [NEXT] to select this parameter. Set the percussion recover time
with the [+]/[-] (or [++]/[--]) buttons.

Click Level: 0-127

This parameter allows you to set the level of click noise heard. Press [NEXT] to select this parameter. Use
the [+]/[-] (or [++]/[--]) buttons to set the click level; higher numbers mean a greater level of click noise.
(Turn drawbar click on/off with the [DRAWBAR CLICK] button in the EFFECTS section.)

Click Time: 0-127

This parameter allows you to set the duration of click noise heard. Press [NEXT] to select this parameter.
Use the [+]/[-] (or [++]/[--]) buttons to set the click time; higher numbers mean a longer click time.

Min Note: C0-G10

This parameter allows you to determine the lowest note number in the active range. Use the [+]/[-] (or
[++]/[--]) buttons to set the lowest note number.

Max Note: C0-G10

This parameter allows you to determine the highest note number in the active range. Use the [+]/[-] (or
[++]/[--]) buttons to set the highest note number.

«
...
112
113
114
115
116
...
»

Содержание W-5000






































































































































































Отзывы:

Нет отзывов

Похожие инструкции для W-5000

Бренд: OfiTE Страницы: 24

Бренд: Hameg Страницы: 44

Бренд: Hameg Страницы: 60

Бренд: Hameg Страницы: 28

Бренд: HAMAR LASER Страницы: 113

NANOCOLOR Advance

Бренд: Macherey-Nagel Страницы: 45

Бренд: Yamaha Страницы: 72

Бренд: Yamaha Страницы: 5

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 8

Бренд: Yamaha Страницы: 7

Бренд: Yamaha Страницы: 60

GranTouch Digital Grand Piano

Бренд: Yamaha Страницы: 19

Бренд: Yamaha Страницы: 44

Бренд: Yamaha Страницы: 29

Бренд: Yamaha Страницы: 4

Бренд: Yamaha Страницы: 47

Бренд: Hach Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды