Rodgers Trillium T807, Руководство пользователя

Страница: 49 / 67

40
MIDI Settings Summary
There are many MIDI settings that can be saved. If the settings are changed and not saved, the
original MIDI settings (default settings) return when the organ is turned off. MIDI settings that
can be changed and saved include:
•
PGM (0-127; see Tone (PGM/MSB/LSB) on page 27)
•
MSB (0-127; see Tone (PGM/MSB/LSB) on page 27)
•
LSB (0-127; see Tone (PGM/MSB/LSB) on page 27)
•
MIDI CH (GTA=1-16, SWA=2/10, PEDA=3/10; MIDI Channel on page 29)
•
OCTAVE SHIFT (-2, -1, 0, +1, +2; see Octave Shift on page 30)
•
VELOCITY (KBD/EXP/2-127; see Velocity on page 30)
•
SUSTAIN (ON/OFF; see Sustain on page 32)
•
REVERB (0-127; see Reverb on page 33)
•
CHORUS (0-127; see Chorus on page 33)
•
EXPRESSION (OFF/EXP/VOL; see Expression on page 34)
These settings are temporary and are lost when the organ is turned off unless they are saved.
Note: A MIDI Save may be performed to save a MIDI setting as the default. See MIDI Save on
page 41.
Instead of saving, you may press and hold (0) and momentarily press SET to return
MIDI couplers to their last saved status. This also returns stop tab Voice Palette selections to
their defaults.
MIDI Settings on Combination Pistons
After additional MIDI settings have been selected on a MIDI coupler piston, these settings can be
saved on any General or corresponding Divisional combination piston.
Saving MIDI Settings on a Combination Piston
1. Select the MIDI coupler piston (and organ stops, if desired).
2. Press and hold the SET piston.
3. Press the desired combination piston.
4. Release both pistons.
The factory default settings for the MIDI coupler pistons are:
MIDI GT A = CH 1
Program Change = OFF
MSB = 0
LSB = 0
Octave Transpose = NORM