Rodgers Trillium T807, Руководство пользователя

Страница: 48 / 67

39
3. Release the SET piston.
4. Turn the Select knob until Device ID is displayed.
M I D I S e t t i n g s
D e v i c e I D 1 7
T o n e N a m e s G S
5. Rotate the Alpha dial to set the desired ID number.
6. Press General Cancel to exit.
Tone Names
You can specify which set of Tone Names is used for the Program Change parameter of the
MIDI couplers. Using GM or GS as the Tone Name set automates the selection of PGM and
MSB, allowing you to choose a sound based on the name shown in the screen. If you use a
module that does not conform to either GM or the PR300S GS sound set, or goes beyond the
sounds available in those standards, you can set the Tone Names parameter to OFF. This allows
you to manually set the PGM, MSB and LSB (refer to the user manual for your MIDI device to
determine the numbers to use for each).
Setting the ToneNames Parameter
1. Press the QuickMenu button.
2. Turn the Select Knob clockwise (right) until the cursor moves to the MIDI Settings parameter
3. Press the QuickMenu button again.
4. Turn the Select Knob clockwise (right) until the cursor moves to the ToneNames parameter.
M I D I S e t t i n g s
D e v i c e I D 1 7
T o n e N a m e s G S
5. Rotate the Alpha Dial to the desired setting (OFF/GM/GS)
6. Press either the flashing MIDI coupler or the General Cancel to exit.
Note: A MIDI Save may be performed to save this setting as the default. See MIDI Save on page
41.
Instead of saving, you may press and hold (0) and momentarily press SET to return MIDI
couplers to their last saved status. This also returns stop tab Voice Palette selections to their
defaults.