Rodgers Trillium T807, Руководство пользователя

Страница: 47 / 67

38
Keyboard Velocity
This global setting sets a velocity response curve for the organ for MIDI couplers with Velocity
set to KBD (keyboard) See the earlier section Keyboard Velocity on page 32. The settings are:
•
LIGHT: most sensitive – velocity is “added” to lighter touch
•
NORMAL: normal sensitivity – a direct relationship between actual touch and sound result
•
HEAVY: least sensitive – velocity is “subtracted” from heavier touch
Note: The MIDI Note Velocity settings do not affect the sampled organ voices.
Setting the keyboard Velocity
1. Press the QuickMenu button.
2. Turn the Select Knob clockwise (right) until the cursor moves to the MIDI Settings parameter
3. Press the QuickMenu button again.
4. Turn the Select Knob clockwise (right) until the cursor moves to the Keybd Velocity
parameter
M I D I S e t t i n g s
K e y b d V e l o c i t y
L I G H T
D e v i c e I D 1 7
5. Rotate the Alpha Dial to the desired setting (LIGHT/NORMAL/HEAVY).
6. Press either the flashing MIDI coupler or General Cancel to exit.
Note: A MIDI Save may be performed to save this setting as the default. See MIDI Save on page
41.
Instead of saving, you may press and hold (0) and momentarily press SET to return MIDI
couplers to their last saved status. This also returns stop tab Voice Palette selections to their
defaults.
Device ID (Advanced Users Only)
MIDI Device ID allows the organist to select the MIDI device identification number used in
System Exclusive Stop Control messages. Normally, the organ both sends and recognizes an ID
number of 17. Stop Control messages with other ID numbers are ignored.
This ID number can be changed to allow independent control over multiple organ consoles
connected via MIDI or to facilitate storing multiple sets of registration information on a
sequencer recording. The number can be set to 1, or 17 through 32. Setting the ID to 1 produces
Stop Control messages that are compatible with older Rodgers PDI and C-Series organs. The ID
returns to 17 when the organ is turned off.
Setting MIDI Device ID
1. Press and hold the SET piston,
2. Turn the Select knob clockwise (right) to the MIDI Settings category.