Rodgers Trillium T807, Руководство пользователя

Страница: 24 / 67

15
Restoring Factory Tutti Setting
1. Press and hold the TUTTI piston for approximately five seconds. The Console Display reads
TUTTI LOCKED or TUTTI UNLOCKED.
2. While holding TUTTI, press and hold SET for an additional five seconds. The Console
Display reads TUTTI FACTORY DEFAULT.
3. Release both pistons.
Melody Coupler
The Melody Coupler (MEL) is located on a piston under the Great manual to the right. The
Melody Coupler lights when it is engaged.
When MEL is lit, any selected stop or MIDI voice in the Swell division sounds from the highest
key being played on the Great manual. This allows a solo melody and an accompaniment to be
played on the same manual.
In its default setting, the Melody Coupler affects keys 25 through 61 on the Great manual. The
lower end of its range is programmable and may be extended down to key 13 or up to key 49.
Note: The Melody Coupler can only be set in General combination pistons.
Setting Range of Melody Coupler
1. Press and hold the SET piston, and press MEL which begins flashing.
2. Release both pistons.
3. While the Melody Coupler is flashing, press a key that corresponds to the lowest note the
range is to extend. Any note from key 13 to key 49 may be selected. After the selected key
has been pressed, the Melody Coupler turns off.
Note: When a key is pressed to set the range, no sound is heard even if stops are on, so no
disturbance is made if programming during a performance.
4. To use the new range, press MEL. This range is saved when the organ is turned off.
Bass Coupler
The name of this feature is derived from the historical term Basso Continuo, meaning
thoroughbass. When engaged, the Bass Coupler lights. Any selected stops or couplers in the
Pedal division sound from the lowest key being played on the Great manual. This provides a
pedal bass sound without actually playing the pedalboard. The Bass Coupler (BASS) is located
on a piston under the Great manual to the right.
In the default setting, the Bass Coupler affects keys 1 through 24 of the Great manual, but its
range is programmable up to key 32 (top of the pedalboard range).
Setting Range of Bass Coupler
1. Press and hold the SET piston, and press BASS, which begins flashing.
2. Release both pistons.