Rodgers 538 insignia, Руководство пользователя

Страница: 41 / 72

Rodgers 538/i548
41
Audio inputs and outputs
The 538/i548 is equipped with stereo auxiliary input
sockets (one for the left channel and one for the right
channel) located on the connector panel to the right
under the keydesk. Audio signals from other sound-
generating devices like synthesizers, MIDI sound
modules and tape players are mixed into the organ’s
main audio system.
The balance between external signal sources and the
538/i548’s sounds can be set by increasing or
decreasing the output level of the device connected to
the AUX INPUTS L (MONO)/R sockets, the
[INPUT¥LEVEL]
knob on the connector panel, or with the parameter
discussed below.
Connect the AUX OUTPUT L (MONO)/R sockets to an
external amplifier or audio recording device.
Public address systems should NOT be connected
through the organ’s audio system.
(1) Press
[QUICK¥MENU]
.
(2) Use the Select knob to select “Audio Control”.
(3) Confirm your choice by pressing
[QUICK¥MENU]
.
(4) Choose “AUX In Volume” with the Select knob.
(5) Confirm your choice by pressing
[QUICK¥MENU]
.
This parameter can also be set using the
[INPUTS¥LEVEL]
knob.
(6) Use the data entry wheel to set the desired volume
for signals received via the AUX INPUTS sockets.
The setting range is: 0~127.
(7) Save your settings if you wish to keep them.
See “Saving general settings” on p. 42, or press and
hold
[SET]
+
[0]
for a few seconds.
(8) Press and hold the
[ø¥EXIT]
piston to return to the
main page.
Other AUDIO CONTROL parameters
The 538/i548’s “Audio Control” environment contains a
lot more parameters than are discussed here. They can
be selected in the same way as the parameters
described so far. We nevertheless recommend not to
change them unless you have a sound understanding
of how they affect the sound. Ask your Rodgers dealer
to set them for you, because you may never want to
change them.
L (MONO)
MAX MIN
R
AUX INPUTS
L (MONO) R
AUX OUTPUTS VOLUME
GENERAL
HEADPHONES
THRU OUT IN
MIDI
INPUT
LEVEL
Optional stereo headphones
(Roland RH-200 or RH-300)
Connect the outputs of a
synthesizer, module,
casette deck, etc., here
To the inputs of an
external amplifier,
recorder, etc.
Output Volume* Volume of the signals transmitted to
the LINE OUT sockets.
Output Panpot* Stereo placement of the signals
transmitted to the LINE OUT sockets.
Main Channel* Audio routing of two MAIN channels.
The 538/i548’s sound can be
reproduced via four channels: 2x MAIN
(front) and 2x ALTERNATE (rear).
Altern Channel* Audio routing of two ALTERNATE
channels.
Ambience Return* Audio routing of Ambience Return, i.e.
the outputs of the Room Modeling
processor.
AUX Channel* Audio routing of the AUX INPUTS
signals.
Ambience Level* Allows you to change the output level
of the Room Modeling (a.k.a. Ambience)
processor.
Internal Equalizer* A 3-band equalizer for the internal
signals (the ones reproduced by the
538/i548’s speakers).
External Equalizer* A 3-band equalizer for the external
signals (the ones reproduced by
external speakers you connect to the
538/i548).
Rodgers 538_i548.book Page 41 Monday, February 4, 2008 9:02 AM