Rodgers 538 insignia, Руководство пользователя

Страница: 18 / 72

Quick tour
18
Rodgers 538/i548
If the new memory you need is located inside the
currently selected bank, you can also select it using
the
[–]
or
[+]
piston.
Note: You cannot change banks with the
[–]
/
[+]
pistons (i.e. go
from memory “8” of bank “1” to memory “1” of bank “2”, etc.).
Selecting a divisional memory
(1) Press the piston of the divisional memory you wish
to load (be sure to use the piston of the desired
manual).
The piston of the selected memory lights.
Configuring the MANUAL I memories to include
the PEDAL registration
The 538/i548 has five memory pistons for manual I,
which can be configured to include the registrations of
both manual I and the pedalboard.
For example, you could use a
[1]
~
[5]
piston of manual I
to recall stops, couplers and MIDI settings on the PEDAL
and MANUAL I divisions at once, or you could use a
MANUAL I piston to change manual I’s registration
alone.
At the factory, the MANUAL I pistons
[1]
~
[5]
are
configured to affect only manual I.
(1) Press
[QUICK¥MENU]
.
(2) Use the Select knob to select “Console”.
(3) Confirm your choice by pressing
[QUICK¥MENU]
.
This takes you to a lower level with several options.
(4) Select the “Divisional Piston” parameter.
(5) Confirm your choice by pressing
[QUICK¥MENU]
.
(6) Rotate the data entry wheel to select “Manual I”
(the divisional memories affect only manual I) or
“Manual I + Pedal”.
(7) Save your setting if you wish to keep it.
See “Saving general settings” on p. 42, or proceed as
follows: Press and hold
[SET]
+
[0]
for a few seconds
while “Function Complete” is displayed.
(8) When finished, press and hold the
[ø¥EXIT]
piston to
return to the main page (if necessary).
Next memory Previous memory
Manual II
Manual I
Rodgers 538_i548.book Page 18 Monday, February 4, 2008 9:02 AM