Rodgers 538 insignia, Руководство пользователя

Страница: 40 / 72

Other functions
40
Rodgers 538/i548
Volume settings
Master Volume
Special situations and individual preferences sometimes
require a temporary change in the overall volume of
the organ. The 538/i548’s overall volume can be set in
two ways.
(1) Adjust the
[GENERAL¥VOLUME]
knob located on
the black input/output box underneath the
keydesk to the right.
…and/or…
(2) Press
[QUICK¥MENU]
.
(3) Use the Select knob to select “Audio Control”.
(4) Confirm your choice by pressing
[QUICK¥MENU]
.
(5) Choose “Master Volume” with the Select knob.
(6) Confirm your choice by pressing
[QUICK¥MENU]
.
(7) Use the data entry wheel to select the desired set-
ting.
The setting range is: 0~127.
(8) Save your settings if you wish to keep them.
See “Saving general settings” on p. 42, or press and
hold
[SET]
+
[0]
for a few seconds.
(9) Press and hold the
[ø¥EXIT]
piston to return to the
main page.
Changing the balance of the divisions
If you think that the balance between the PEDAL,
MANUAL I and MANUAL II divisions is not quite right,
because one is much softer/louder than the others, you
can use one of the following parameters to correct
that.
The quickest way is usually to single out the division
whose volume needs correcting, and to change only
that. Otherwise, you may end up spending a lot more
time than originally planned.
(1) Press
[QUICK¥MENU]
.
(2) Use the Select knob to select “Audio Control”.
(3) Confirm your choice by pressing
[QUICK¥MENU]
.
(4) Choose “Division Volume” with the Select knob.
(5) Confirm your choice by pressing
[QUICK¥MENU]
.
(6) Use the Select knob to choose “Division”.
(7) Use the data entry wheel to select the division
whose volume you want to correct.
The possibilities are: Pedal, Manual I, Manual II
(8) Turn the Select knob to move to the “Volume”
entry.
(9) Use the data entry wheel to set the desired volume
for the division you selected in step (7).
(10) Use the Select knob to choose the desired setting.
The setting range is: 0~127. Obviously, it would be a
good idea to play on the three keyboards to test your
new balance.
(11) Save your settings if you wish to keep them.
See “Saving general settings” on p. 42, or press and
hold
[SET]
+
[0]
for a few seconds.
(12) Press and hold the
[ø¥EXIT]
piston to return to the
main page.
L (MONO)
MAX MIN
R
AUX INPUTS
L (MONO) R
AUX OUTPUTS VOLUME
GENERAL
INPUT
LEVEL
HEADPHONES
Rodgers 538_i548.book Page 40 Monday, February 4, 2008 9:02 AM