Rodenstock REM 3000, Инструкция по эксплуатации

Страница: 80 / 109

3.6.4 Export
(1)
(2)
(3)
(4)
(5)
(Fig. 1)
DATA Transfer (1)
Connect : Connects with DATA Transfer.
Disconnect : Does not connect.
Auto Inquiry (2)
Sets whether or not patient information inquiry will be
performed automatically when ID is entered.
ON : Queries the Link automatically for patient
information, when the ID number is confirmed.
OFF : Does not query automatically when the ID number
is confirmed.
Necessity of ID (3)
ID entry conditions to send the measured data will be
set on the send confirmation screen.
Essentially : Set only when it is necessary that an ID
be entered. Unless the ID is entered, the
data cannot be sent.
Basically : This is set when enabling the data to be
sent without an ID (normally an ID must
be set). If an ID is not entered, the data
will be sent as “NO ID.”
Rarely : Set when you do not want to be concerned
about ID entry. The send confirmation screen
will be displayed but the measured data will
be sent automatically. If an ID is not entered,
the data will be sent as “NO ID.”
Priority of Operation (4)
Sets whether to display the patient information screen
automatically or not, in order to enter an ID before
starting the capturing process.
ID Input : Displays the patient information screen
automatically.
Measurement : Does not display the patient
information screen automatically.
3-38
$XWR ,QTXLU\