Rodenstock REM 3000, Инструкция по эксплуатации

Страница: 38 / 109

3.2 Preparation before use
3.2.1 Connecting the power cord
(3)
(2)
(1)
n
The correct orientation of the power cord is shown.
Make sure that the orientation is correct, and that
the cord is firmly plugged in.
Plug the power cord connector (1) into the power socket (2)
on the side of the instrument.
On the plug side, connect all three pins (3).
(Fig. 1)
3.2.2 Connecting an external digital printer
n
The correct orientation of the power cord is shown.
Make sure that the orientation is correct, and that
the cord is firmly plugged in.
n
Use only the specified printer and cables. Use a
printer in conformity with IEC60601-1 or a printer
meeting IEC950 and isolated with an insulation
transformer to avoid possibilities of electrical
shock.
(Fig. 1)
(2) (1)
For a Mitsubishi digital printer, plug the connector into the
USB-H terminal (1) on the side of the instrument, using the
correct orientation.
For non-Mitsubishi digital printers, plug the connector
into the USB-D terminal (2) on the side of the instrument,
using the correct orientation.