Rodenstock REM 3000, Инструкция по эксплуатации

Страница: 40 / 109

3.2.3 Connecting external ID input device
n The correct orientation of the power cord is shown.
Make sure that the orientation is correct.
(Fig. 1)
Plug the connector of the external ID input device (barcode
reader, card reader, numeric keypad, keyboard) into the
USB-H terminal (1) on the side of the instrument, using the
correct orientation. (Fig.1)
3.2.4 Connecting DATA Transfer
n
For details about the data communication, refer to
“3.6 Data communication.”
n
Refer to the corresponding instruction manual for
settings for DATA Transfer.
n
The correct orientation for the LAN cable and the
USB cable is shown. Make sure that the orientation
is correct, and that the cord is firmly plugged in.
n
The instrument is not provided with optional
cables. Provide optional cables.
A LAN cable is required to connect to DATA Transfer.
a) Connecting LAN cables
For connection to DATA transfer on a LAN, the type of LAN
cables used varies depending on the method of
connection. Provide the following type of LAN cables
depending on the method of connection.
(Fig. 1)
3-4
(2) (1)
● When connecting via a HUB:
Straight type, Cat.5 or more
● When connecting directly to a computer:
Cross type, Cat.5 or more
Plug one end of a cable into the LAN connector (1) on the
side of the instrument, and plug the other end of the cable
to the LAN connector of a HUB or computer to which to
run the HUB or DATA Transfer, using the correct
orientation.
(1)