Roda R2000 Truck, Руководство пользователя

Страница: 15 / 53

15
Control Box Operation:
Manure:
-PTO on truck (separate from control box) is turned on, hydraulic pump engaged (and vertical
beaters if equipped)
-Control box power switch is turned on
-Beater switch is turned on (if equipped with horizontal beaters)
-Slop Gate “Open” switch must be activated before apron will engage
-Apron switch moved to “manure” mode, apron speed adjustable from 0-100% on variable
speed dial
-If manure jams beaters, Manure/Silage switch must be turned off and the “Apron Reverse”
switch depressed and held for
5 Seconds Maximum to reverse the apron and pull material back
from the beaters.
-As load nears empty, manure switch can be set to “High Speed Cleanout” to allow apron to go
to high speed so remaining load can be quickly dispensed
-When empty, (beater switch turned off if equipped with horizontal beaters) apron switch is
turned to off position, slop gate closed, power switch turned off, PTO disengaged
NOTE: PTO must be off when not spreading manure
to allow for hydraulic system to cool down!
Silage:
-
PTO Switch is engaged
-Control box power switch is turned on
-Slop Gate “Open” switch must be activated before apron will engage
-Apron switch moved to “silage” mode, dispensing silage until box is empty, apron speed
adjustable from 0-100% on variable speed dial
-When empty, apron switch is turned to off position, slop gate closed, power switch turned off,
PTO disengaged
NOTE: PTO must be off when not unloading silage
to allow for hydraulic system to cool down!
WARNING: PTO and truck engine must be turned off when removing jams, cleaning,
and performing any repair or maintenance operations!