Roda R2000 Truck, Руководство пользователя

Страница: 6 / 53

SAFETY
TRANSPORTING SAFETY PRECAUTIONS
WHEN TRANSPORTING A LOADED SPREADER, USE REDUCED SPEED AND BE
SURE THE VEHICLE HAS ADEQUATE BRAKES TO STOP.
•
DO NOT ALLOW ANYONE TO RIDE ON OR INSIDE THE SPREADER.
•
REDUCE SPEED WHEN TRAVELING loaded and/or over rough, soft, or wet terrain. Exercise caution
on side slopes and when turning corners.
•
DO NOT ALLOW OPERATION OF THIS UNIT BY AN INEXPERIENCED OR UNQUALIFIED
PERSON.
Keep all unqualified people away from spreader during operation. Operators of this unit must
be alert and use good judgment at all times and must have fully read and understand this manual.
•
AVOID OPERATING THE SPREADER CROSSING GULLIES OR DITCHES.
•
WHEN WORKING ON SLOPES or inclines, travel uphill or downhill. Keep the transmission in gear
when going downhill.
•
AVOID DRIVING ON loose fill, rocks, inclines, ditches, and holes.
•
ALWAYS PARK the spreader on level ground and block the tires.
•
IF UNIT IS FOR HIGHWAY TRANSIT the end user is responsible for federal, state and local vehicle
regulation compliance (example: under ride requirements, licensing, lighting and weight limitations).
SAFETY DECALS
SAFETY DECALS ARE PLACED ON THIS UNIT FOR THE PROTECTION OF THE
OPERATOR OR ANY PERSON NEAR THE UNIT.
•
BE SURE EVERYONE WHO OPERATES THE SPREADER UNDERSTANDS ALL THE
INFORMATION, WARNING, CAUTION AND DANGER DECALS.
•
KEEP THE DECALS CLEAN so they are readable. This applies to all caution, warning, and danger
decals.
•
It is the OWNER’S RESPONSIBILITY to provide information for safe operation of this machine.
•
REPLACE ANY DAMAGED OR WORN DECAL. Once any part of a decal becomes non-readable, it
should be replaced. Replacement decals may be ordered through your dealer or Roda Manufacturing.
•
WHEN REPLACING DECALS, be sure the surface area is clean and dry, peel the backing off the decal,
and apply to the unit. Be sure to wipe with a clean cloth to rub out all air bubbles to assure a good seal. For
best adhesion decals should be applied in temperatures of 50
°
(f) or warmer.
6