Rocom Doortello Business FW T2.05W2.04 Скачать руководство пользователя страница 7

Страница: 7 / 60

User guide

Doortello Business

Issue 1.00

Page 7

Behind panel installation

The requisite for the installation of the Doortello Business BG version is that there is

already an exiting plate with a speaker grid available. The Doortello Business BG has

been especially developed for this type of use. As the form and technical details of

the plat with the speaker grid may differ from side to side we don’t have the

possibility to provide here precise installation instructions. It is very important that

the microphone is placed precisely in correspondence with a hole to the outside. If

necessary a hole has to be drilled. For a better speech quality of the speaker phone

the unit has installed flush fitted with the plate.

Using the available plastic frame adapters also the ES module can be used for

installation in letter boxes, pedestals and similar installations.

Flush and wall mounted installation

Please read carefully this user guide before you install the unit. Take care about the

security advices. Diregarding the warnings may be against existing laws or cause

dangerous situations.

Please note!

Think any time during installation at your own safety! Be careful and

disconnect the 230 V power supply before connecting the external power

supply unit. Before you touch any cable ensure that no voltage is present on

the line. Please consider that it can be against safety rules to run low and

high power cables in the same duct. An installation of 230 V cable inside the

door station is forbidden by law. If you have to drive high power circuits with

the internal driver contact of the device you have to use external high power

relais (like the 1471, see also the chapter

Options

)

Security advices

For the flush and wall mounted installation of the device the modular Doortello

Business door station has to be used. This program offers you a wide range of

different flush and wall mounting cases, as well as different pedestals. The

Doortello Business ES device is installed as one of the modules of the modular

door station. The single modules are conneted together using the delivered flat

cable. More details about the installation of the Doortello Business modular door

station can be found in the documentation delivered with the cases and modules.

Please note!

NEVER install a ES version behind an existing panel. This might cause heavy

disturbances to the speaker phone making his use impossible. For behind

panel installation use only the BG version!

Содержание Doortello Business FW T2.05W2.04





























































Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды

Rocom Doortello Business FW T2.05W2.04, Руководство пользователя

Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды