Rocom Doortello Business FW T2.05W2.04 Скачать руководство пользователя страница 40

Страница: 40 / 60

User guide

Doortello Business

Issue 1.00

Page 40

Calling a phone using a speed dial

Press the button „handset“ at the doorstation. The red LED will light up and a dial

tone can be heard on the loudspeaker. Now you can dial the desired telephone

number using the dial pad. The single DTMF digits can be heard on the

loudspeaker. With each key pressed the green LED will acknowledge this with a

short flash. If needed, i.e. if you are using the device connected to a GSM, DECT or

VoIP adapter, you can terminate the dialling by pressing the digi

If you press a wrong digit you can reset the connection by pressing the "handset"

button again. The connection will be now terminated a set up again with a new dial

tone. When the called party will asnwer the call the red LED will go off a the green

LED will light up. You can talk now with you correspondent.

Please note!

The input on the dial pad is time restricted. After the line seizure, and after

each following button activation, you will have 5 s time to press the next

button. After timeout the dial pad will be deactivated and you have to wait for

the maximum line seizure timeout before making a new dial.

Please note!

The automatic connection termination and new seizure after a wrong dial will

work only with devices with an EXTERNAL POWER SUPPLY. Units which are

powered only using the telephone line can terminate the call and have to seize

the line pressing the "handset" button again.

Calling a phone using a chime button

The following use description is based on the default functionality. The described

procedure may change if the device has been reprogrammed.

How to use

Press the chime button at the doorstation. The red LED (is installed) will light up and

the stored number will be dialled. When the called party answers the call the red

LED will go off and the green LED (if installed) will light up. You can now talk to the

called party.

Calling a phone using the dial pad

Press the button „handset“ at the doorstation. The red LED will light up and a dial

tone can be heard on the loudspeaker. Now you can dial a speed dial code

between

and

using the dial pad. With each key pressed the

green LED will acknowledge this with a short flash. If the code is correct a number

will be dialled on the line. You will hear the DTMF digits. If the code is wrong the

connection will be terminated.

If you press a wrong digit you can reset the connection by pressing the „handset“

button again. The connection will now be terminated a set up again with a new

Содержание Doortello Business FW T2.05W2.04





























































Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды

Rocom Doortello Business FW T2.05W2.04, Руководство пользователя

Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды