User guide
Doortello Business
Issue 1.00
Page 36
Tone tables
To make the tone programming easier the system has 30 predefined tone table
which can beloaded on request. Loading the table all the specific busy and ring back
tone are setted at once. A single programmation of each tone is then no more
necessary. As default the table 01 is loaded. If you want to change the tone table
please follow this procedure:
OK tone
{table number}
OK tone
Values from
to
can be used.
Example:
Number of rings
If the unit calls a telephone which doesn’t answer within a programmed number
of calls the connection will be automatically disconnected. As default the number
of call before disconnection is 7. To change the number of calls before
disconnection, please follow this procedure:
OK tone
{number of calls}
OK tone
You can use values from
to
.
Example:
You want that a extension should be called for 18 times before the call is
automatically disconnected: Input:
OK tone
OK tone
Please note!
The device will detect the ring back tones and not the real rings to the
telephone. Some switches can send ring back tones which don’t correspond
exactly to the ring back tones sent.
Please note!
The number of call is also limited by the maximum connection time
programmed. If you want to increase the ring time (i.e. to use a call diversion
feature) you might also have to increase the maximum connection time
programmed.
