Rocom Doortello Business FW T2.05W2.04 Скачать руководство пользователя страница 11

Страница: 11 / 60

User guide

Doortello Business

Issue 1.00

Page 11

The external DC power supply must have a voltage range form 8 to max. 12 Vdc

stabilized. We suggest you the use of the our power supply unit PRS 231S or the

DB RU 1 unit (see also chapter

Options

The external power supply is also used to power the LED illumination of the door

station modules. Using the DC input on the door phone only 12 modules can be

powered over the DB bus. If more modules are installed a separate power supply

has to be used. In this case the door station modules have the jumper which is

used to separate the power line between the modules. For the power supply of

the modules you can find a screw connector on each unit. For more information

please read the specific documentation of the single modules.

Please note!

With installations at sites with extreme weather conditions, as well with wall

mounted and pedestals installations we suggest in any case the power supply

of the door phone to activate the integrated heater element.

Please note!

The external power supply MUST be stabilized. The voltage MUST NOT exceed

12 Vdc. Higher voltage will destroy the unit!

Please note!

If you are installing more door phone on the same site a separate power

supply unit has to be used for each door phone. Connecting more door

phone with the same power supply unit may damage the devices and will

short circuit the telephone lines!

Please note!

The door station modules can be powered also with 12 Vac. Please ensure

that the voltage used does not exceed 13,8 Vpp. A higher voltage may

destroy the modules. If using an external voltage to power the modules

PLEASE ENSURE THAT THE SEPARATION JUMPER IS OFF ON THE FIRST MODULE.

If not applying the external voltage to the modules WILL DESTROY the door

phone!

Power supply over the telephone line

The Doortello Business door phone has been designed to work as well using the

telephone line only. In this case the device is powered by the telephone line itself.

Using the telephone line only the door opener and the modules LED illumination

are to powered separately. In this case only a AC power supply is needed as the

module can power the LED also using a transformer only. Please refer to the

specific user guides for more information.

Please note!

For specific functions, like the dial of a flash signal, the telephone line has to

be interrupted for a short time. To ensure that the processor inside the device

are still powered during this time, if only a power supply over the telephone

Содержание Doortello Business FW T2.05W2.04





























































Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды

Rocom Doortello Business FW T2.05W2.04, Руководство пользователя

Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды