Rocom Doortello Business FW T2.05W2.04 Скачать руководство пользователя страница 41

Страница: 41 / 60

User guide

Doortello Business

Issue 1.00

Page 41

Access code

Press the button „key“ at the doorstation. The red LED will light up. Now you can

dial am access code using the dial pad. With each key pressed the green LED will

acknowledge this with a short flash. The code input has to be terminated with the

button. If the code is correct the red LED will go off, the green LED will light

up and the specific driver contact will be activated for the duration of 5 s. If the

code is wrong the connection will be terminated and seized again for a new input

until a right code has been netered or the maximum line seizure timeout is

reached.

If you press a wrong digit you can reset the connection by pressing the „key“

button again. The connection will now be terminated a set up again.

Please note!

The input on the dial pad is time restricted. After the line seizure, and after

each following button activation, you will have 5 s time to press the next

button. After timeout the dial pad will be deactivated and you have to wait for

the maximum line seizure timeout before making a new dial.

Please note!

The automatic connection termination and new seizure after a wrong dial will

work only with devices with an EXTERNAL POWER SUPPLY. Units which are

powered only using the telephone line can terminate the call and have to seize

the line pressing the "handset" button again.

dial tone. When the called party will answer the call the red LED will go off a the

green LED will light up. You can talk now with you correspondent.

Please note!

The input on the dial pad is time restricted. After the line seizure, and after

each following button activation, you will have 5 s time to press the next

button. After timeout the dial pad will be deactivated and you have to wait for

the maximum line seizure timeout before making a new dial.

Please note!

The automatic connection termination and new seizure after a wrong dial will

work only with devices with an EXTERNAL POWER SUPPLY. Units which are

powered only using the telephone line can terminate the call and have to seize

the line pressing the "handset" button again.

Direct activation of a driver contact

If needed it is possible to activate a driver contact by pressing directly a therefore

programmed button (i.e. the „lamp“ button on the dial pad or a chime button). In

this case the associated driver contact will be activated for 5 s after pressing the

button. The green LED (is installed) will light up for the duration of the activation.

Содержание Doortello Business FW T2.05W2.04





























































Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды

Rocom Doortello Business FW T2.05W2.04, Руководство пользователя

Результаты поиска

Содержание Doortello Business FW T2.05W2.04

Отзывы:

Похожие инструкции для Doortello Business FW T2.05W2.04

Бренды по названию

Популярные бренды