To order parts and supplies: 800.343.9353 >> eastwood.com
7
PROBLEM
CAUSE
CORRECTION
Tool Doesn’t
Respond to
Paddle
Depression
Insufficient CFM
at tool inlet
(4 CFM @ 90
PSI minimum
for best results)
Verify sufficient air supply to tool.
Tool contaminat-
ed by moisture
Check for moisture in air line and tool air inlet.
Tool Perfor-
mance is Slow
or Sluggish
Insufficient CFM
at tool inlet
(4 CFM @ 90
PSI minimum
for best results)
Verify sufficient air supply to tool
Tool contaminat-
ed by moisture
Check for moisture in air line and tool air inlet.
Tool Vibrates
Excessively
During Use
Torn or
loose belt
Stop use immediately and check for torn belt.
Check for loose belt.
Tool Emits
Excessive or
Unusual Noise
During Use
Lack of lubrica-
tion in air motor
Stop use immediately and add a quality air tool oil.
TROUBLESHOOTING
